 TOOL LIFE At Don Hall & Associates, we enjoy being on the cutting edge of the latest in tooling technology for woodworking shops of all sizes. Recent advancements include methods to dramatically improve the life of any cutting tools as well as providing a more efficient and safer way to clean tools and equipment of resins, oils, and rust. The products and services listed here are worth adopting in your shop or maintenance department. Believe Us!   CRYOGENIC FREEZING How
would you like to buy only HALF as many cutting tools PLUS running thousands
of feet more lumber before sharpening your blades?
Just begin with a test of our Cryogenic Freezing.
It can dramatically lower your tooling costs by increasing the
cutting life of your tools by 3 times or more, plus the savings of greatly
reduced down time in production and sharpening costs. By
special arrangements with Cryo-Plus
of Wooster, Ohio you can send your bits, knives, saw blades and other
cutters to them for a FREE TEST of up to 6 pounds of tooling.
Prove for yourself that Cryogenic Freezing will work for you too.
CLICK HERE to email your request for our simple folder which explains all about the Cryo process and obtain our Free Test Coupon. Cryogenics is a proven scientific fact in metallurgy that has been perfected in recent years for industrial and commercial use. It involves deep freezing any cutting or wearing steel down to 300 degrees BELOW ZERO, so that the molecular structure is literally changed to a much tougher, longer-lasting degree. And it only has to be done ONCE to any tool! Then you use it in your normal production as before, sharpening only when needed. You’ll just be going to the grinding bench LESS THAN HALF AS MUCH! (Cost for Cryogenic treatment is based on weight, ranging from $17 for one pound, down to $9 per pound for 50 pounds, plus UPS both ways.) So, use the Cryogenic process on your new or old tooling, then keep it clean and further increase your yield with our environmentally safe liquids below. You
can now economically remove grease, oils, wood pitch (resins) and rust, but
avoid the costly and hazardous environmental and disposal problems which
have long plagued millworkers. Gone
are the days of smelly diesel, harmful solvents, and volatile
cleaners. The EPA, OSHA, and your local Fire Department will love
that! Knives,
saws, bits, and woodworking tools and machinery which are cleaned
consistently with "VPW-SC-1000",
"Kutter-Kleener",
and "Evapo-Rust"
last longer, stay sharper and cooler, and yield greater productivity and
safety than any other cleaning method.
Don't hesitate to contact
us if you'd like to try any of these products. 
 Vega A
SAFE, AQUEOUS
This versatile cleaner is safe to use, store (indefinitely), and dispose of in neat (non-polluted) form. It is the base ingredient in "Kutter-Kleener" which has rust inhibition properties added. VPW-SC-1000 in selected dilutions of Concentrate may be used in spray bottles, soak tanks, and steam or ultrasonic cleaners. It is offered in 32 oz. spray bottles, 1-gallon, 5-gallon, and 55-gallon containers. KUTTER-KLEENER (TM)
Home | About Us | Additional Services | Jobs | Links | Products Hosted and maintained by Advanced Digital Media Copyright © 2004 by Don Hall & Associates. All rights reserved. |
EVAPO-RUST
(TM) - A remarkable, award-winning aqueous solution that truly removes,
eliminates, and prevents rust! By chelating iron oxide molecules when iron
or steel is soaked, typical rust is totally gone in one to 24 hours. Even
rust over 50 years old has been tested and removed when immersed in Evapo-Rust
for 3 weeks! One gallon will derust up to 300 pounds of moderately
rusted steel. It can be used over and over again until it finally
becomes diminished and ineffective. Spent (used) solution can be normally
discarded because it puts only water and iron oxide into the soil, common
ingredients already there. For steel items too large to immerse, ask about
our specially-designed "wet-patch" for removal of rusty spots. 
